Reply within 1 business day|Worldwide door-to-door delivery WhatsApp / WeChat +86 191 1840 3930|Contact
Home / Custom Design / Custom Process
Brief · Stone · CAD · Make

Custom Jewelry Process Made Clear

Six steps take your idea to a finished lab-grown diamond piece. At each one you know what to send, what you approve, and what happens next.

6 clear stepsCAD approved before production10–15 business days for a first build
Custom jewelry design desk with CAD on a tablet, sketches and ring models
At a glance

The Six Steps at a Glance

1

Share your idea

You send
Photos, sketch, shape, metal, budget, ring size
You approve
Nothing yet
Then
We reply with questions and a price range
2

Design direction

You send
Answers on style, proportions, metal
You approve
The quote
Then
Stone search and CAD can start
3

Choose the stone

You send
Your pick from the options sent
You approve
Center stone and its report number
Then
Stone is reserved for your piece
Production gate4

CAD review

You send
Comments on each version
You approve
Final CAD with dimensions
Then
Production starts; later changes cost time and money
5

Production and setting

You send
Nothing, unless we have a question
You approve
—
Then
Casting, stone setting, finishing
6

Final check and delivery

You send
Delivery address
You approve
—
Then
Inspection against the CAD, then shipping
You approve at this stepWe handle it and keep you updated
Before you start

What to Prepare Before You Start

Ring sketch, reference notes and loose stones prepared for a custom design brief
  • Reference imagesScreenshots or photos of rings you like. Say what you like about each one.
  • Shape preferenceRound, oval, cushion, emerald, pear, radiant or any shape you are considering.
  • MetalWhite, yellow or rose gold, platinum, or undecided.
  • Budget rangeIt decides the stone options we show you.
  • Practical notesRing size, engraving, deadline, how the ring will be worn (active hands, stacking with a band).
Step by step

Step by Step

Step 1

Share your idea

Send whatever you have. A single photo is enough to start. We reply with questions on anything that changes price or feasibility, and a first price range.

You send: photos, shape, metal, budgetYou get: questions + price range
Step 2

Define the design direction

We agree on the style, proportions, metal and the center stone size the design is built around. You receive a quote covering the stone, metal, setting work and any CAD charge.

You approve: the quoteThen: stone search and CAD start
Step 3

Choose the center stone

We send stone options that fit the design and budget, with report numbers you can check on the IGI, GIA or NGTC website. Ask for photos or video of any stone. Once you choose, the stone is reserved and its exact measurements go into the CAD.

You approve: stone + report numberThen: stone reserved for your piece
Step 4

Review and approve the CAD

You receive a 3D design showing the setting from several angles with key dimensions. Request changes until it is right. Our CAD approval checklist lists every point. Check:

Stone size vs settingBand widthSetting heightProng styleSide stonesRing size and engraving
Production starts only after you approve the CAD.Changes after approval usually mean re-casting, which adds cost and time.
Step 5

Production and stone setting

Design review of a custom lab-grown diamond ring
01Design review
Mounting preparation of a custom lab-grown diamond ring
02Mounting preparation
Setting of a custom lab-grown diamond ring
03Setting
Finishing of a custom lab-grown diamond ring
04Finishing

The approved design is printed and cast in your metal. The mounting is cleaned and checked for structure and stone fit before setting. The stone is set, prongs are shaped and secured, and the piece is polished.

Step 6

Final check and delivery

The finished piece is inspected against the approved CAD: stone and report number, setting security, dimensions, ring size, finish and engraving. It is then packed and shipped, insured, to your address.

Stone + report numberSetting securityDimensionsRing sizeFinishEngraving
Timing

What Affects Timing

Faster SPEEDS UP

  • Clear reference photo and decided metal
  • Standard shape and size, stone in stock
  • Simple solitaire or existing setting
  • Quick replies on CAD

Slower ADDS TIME

  • Design still evolving
  • Unusual size or shape, matched pairs, new report needed
  • Complex halo, pavé or fully new design
  • Several rounds of CAD changes
10–15business days

As a guide, a sample or first build of a new design takes about 10–15 business days once the design input is complete, plus the time you take to approve CAD. Your quote states the expected timing for your piece.

Ready to start?

Ready to Start?

Send your idea, reference photos or preferred direction, and we take it from there.

Can I change the design after approving the CAD?
Small changes can sometimes be made before casting. After casting, changes usually mean making the piece again, so check the CAD carefully.
Do I approve the diamond before it is set?
Yes. You choose the center stone and see its report number before it goes into the CAD and setting.
Is this process only for engagement rings?
No. Earrings, pendants, necklaces and bracelets follow the same steps. For brand collections and production runs, see Private Label & OEM.
What do I receive with the finished piece?
The jewelry, the report for any certified stone, and the packaging agreed in your order.