Reply within 1 business day|Worldwide door-to-door delivery WhatsApp / WeChat +86 191 1840 3930|Contact
Diamond shapes

Oval Lab-Grown Diamond Guide: How to Choose Length-to-Width Ratio, Bow Tie, and Visual Size

Hao LiBy Hao Li, Senior GemologistUpdated 4 November 20264 min read
Lab-grown diamonds in six shapes on a glass block

A 1.00 ct round is about 6.4 mm across. A 1.00 ct oval with a 1.35 ratio is about 7.7 × 5.7 mm, so its long side is more than a millimeter longer than the round’s diameter, and on the finger it reads as the bigger stone. The price for that extra presence is a shape that most reports do not cut-grade and a dark band, the bow-tie, that only video reveals.

Ovals look larger than rounds of the same weight and make fingers look slimmer, with brilliant sparkle and no corners to chip. Choose a length-to-width ratio between about 1.30 and 1.50 (1.35 to 1.45 is the classic look), make sure the bow-tie is mild, and check depth so the stone faces up to its weight. Most oval reports carry no cut grade (IGI offers one; GIA plans one for 2027), so video does the work the cut grade does for a round.

Oval at a glance

Ratio1.30–1.50Balanced elongation
Bow-tieMild, changes as stone movesStrong bow-tie looks like a dark band
DepthAbout 58–63%Deeper stones face up smaller
TableAbout 53–63%Balanced brightness
Polish and symmetryExcellent or Very GoodCut grade only on some IGI reports
ColorG–H in white metalEnds can show slight color
ClarityVS2–SI1 eye-cleanBrilliant faceting hides inclusions

Length-to-width ratio

Swipe the table to see more →

Ratio Look
1.25–1.30 Fuller, closer to round
1.35–1.45 Classic oval
1.50–1.60 Slender, more elongated
Above 1.60 Very long; can look narrow

The ratio is length divided by width, from the report’s measurements. A 7.7 × 5.7 mm oval has a ratio of 1.35.

The bow-tie

Most ovals show a darker band across the center, shaped like a bow-tie, where light leaks or is blocked by the viewer’s head. A mild bow-tie that shifts as the stone moves is normal and adds contrast. A strong, fixed dark band reduces brightness. You can’t see this on a report; only photos and video show it. Check the stone tilting slowly, face-up and at angles.

Visual size

A 1.00 ct oval is about 7.7 × 5.7 mm, compared with about 6.4 mm for a round. That longer outline makes it look larger on the finger. Very shallow ovals look even larger but may show windowing (a washed-out center). Deep ovals hide weight below and face up smaller.

Swipe the table to see more →

Carat Approx. oval measurements (ratio ~1.35–1.40)
1.00 ct 7.7 × 5.7 mm
1.50 ct 8.8 × 6.3 mm
2.00 ct 9.7 × 7.0 mm
3.00 ct 11.0 × 8.0 mm

Color and clarity

Color tends to gather at the ends of elongated shapes, so in white metal G to H is a safe range; H to I in yellow or rose gold. Ovals hide inclusions well, so VS2 or SI1 eye-clean often works.

Outline and symmetry

Look for even, rounded shoulders and ends. Common issues: flat sides, pointed ends (“egg” shape), or one side fuller than the other. Compare the outline in a top-down photo.

Settings

Swipe the table to see more →

Setting Effect
Solitaire (4 or 6 prongs) Clean, classic
Hidden halo Side sparkle, clean face-up
Oval halo Larger look
East-west Modern, horizontal
Three-stone with pears Elongated line

What a report shows for an oval

On a report, an oval gets measurements, polish and symmetry. An overall cut grade appears only on some reports: IGI can grade loose fancy shapes, while GIA grades cut on round brilliants only and plans fancy-shape grades for 2027. IGI and NGTC give full color and clarity grades. GIA, since October 1, 2025, gives lab-grown stones a Premium or Standard assessment instead, which for fancy shapes rests on color, clarity, polish and symmetry; see the GIA report guide. No report records the bow-tie, the outline or how large it faces up, so judge that on video.

Matching ovals for earrings and three-stone rings

Matched ovals should share the same ratio, outline and bow-tie strength as well as weight and grades. Compare the measurements of both stones and watch them side by side on video.

Common mistakes with ovals

  • Choosing by carat and missing a deep stone that faces up small.
  • Ignoring a strong bow-tie visible only on video.
  • Choosing a ratio from a photo without seeing it on a hand.
  • Leaving the ends unprotected in a thin prong setting; four or six prongs are safer.

Oval questions

What is the best ratio for an oval diamond?

About 1.35 to 1.45 is classic; 1.30 to 1.50 is a common range.

Do all ovals have a bow-tie?

Most show some. Choose one where it is mild.

What color should an oval be?

G to H in white metal is a safe range.

Find an oval in your ratio

Tell us the carat or size range, the ratio you like and the color and clarity range, and we will suggest ovals with their measurements and reports. NUVU can arrange IGI, GIA or NGTC reports. See our lab-grown oval engagement rings, or send your requirements or WhatsApp / WeChat +86 191 1840 3930.

Hao Li, Senior Gemologist at NUVU
Written byHao Li
Senior Gemologist, NUVU

12+ years in lab-grown diamond grading, identification and quality assurance for both HPHT and CVD stones.

Credentials: GIA GG, IGI GG
NUVU

About NUVU. NUVU is the international brand of New Perspective Superhard Materials Co., Ltd. in Zhecheng, Henan, China. We grow HPHT lab-grown diamonds in-house and cut, polish and match stones in our own workshop.

Related Guides