Reply within 1 business day|Worldwide door-to-door delivery WhatsApp / WeChat +86 191 1840 3930|Contact
Home / About NUVU / Factory Tour
From growth press to finished piece

Lab-Grown Diamond Factory Tour

Follow a lab-grown diamond from the growth press in Zhecheng to a finished, inspected piece of jewelry.

HPHT production hall, Zhecheng

NUVU is the brand of New Perspective Superhard Materials Co., Ltd. in Zhecheng County, Henan. The company’s background covers diamond powder, synthetic diamond, lab-grown diamond rough and polished loose diamonds. We grow HPHT diamonds in Zhecheng and source CVD diamonds from qualified growers when an order calls for them. Cutting, matching, jewelry production and inspection are coordinated by the NUVU team, working with specialist workshops where a job needs them.

The stages at a glance

Six Stages, Growth to Delivery

HPHT presses in a Zhecheng production hall
HPHT presses in a Zhecheng production hall.
01

1. Diamond Growth

All stones

In HPHT growth, carbon is dissolved in a metal solvent at about 1,300–1,600 °C and very high pressure, then crystallizes on a small diamond seed over days to weeks. CVD grows diamond layer by layer from a carbon-rich gas in a vacuum chamber, usually over three to four weeks.

Both produce diamond. The method affects typical crystal shape, inclusions and whether post-growth treatment is common, which is why we note it for every stone.

Laser cutting a lab-grown diamond crystal
Diamond planning software modelling the polished stone and yield
Laser cutting a lab-grown diamond crystal. Inset: diamond planning software modelling the polished stone and yield.
02

2. Planning and Cutting

All stones

Each rough crystal is scanned and planned to get the best balance of size, shape and quality from it. It is then sawn or laser-cut, bruted or shaped, and polished facet by facet.

Cutting decides how bright a stone looks, so this is where good and average lab-grown diamonds part ways. The planning screen shown here models the polished stone inside the rough. It is not jewelry CAD. Read why cutting and polishing quality matters.

Sorting polished lab-grown diamonds on a light table
Sorting polished lab-grown diamonds on a light table.
03

3. Grading and Sorting

All stones

Polished stones are sorted by size, color and clarity. Stones that need a report are sent to IGI, GIA or NGTC, and the report number is usually laser-inscribed on the girdle.

Melee and calibrated stones are sorted to mm size for setters.

Selecting loose diamonds against an order spec
Selecting loose diamonds against an order spec.
04

4. Stone Selection and Matching

Loose stones & jewelry

This is where your order starts to take shape. Stones are picked against your spec, checked under magnification, and matched for pairs, layouts or calibrated runs.

For matched and calibrated goods, inspection follows the tolerances agreed for your order and standard industry practice.

Setting a center stone in a ring
Setting a center stone in a ring.
05

5. Jewelry Production

Finished jewelry only

For finished jewelry, the approved CAD is printed and cast in the chosen metal, cleaned up, and the stones are set. Prongs, seats and side stones are checked as each piece is built.

Loose-stone orders skip this stage.

Final inspection of a finished ring under a loupe
Final inspection of a finished ring under a loupe.
06

6. Final Inspection and Packing

All orders

Every piece is compared with the approved order before it is packed: stone and report number, setting security, finish, size, engraving, stamping, logo and packaging.

Loose stones are checked against the approved stone list and packed in labeled parcels.

For buyers

Why Seeing the Process Helps You Buy

You know what you are paying for

Growth method, cutting quality and inspection all show up in the price.

You can write a better spec

Knowing where size sorting and matching happen helps you ask for the right tolerances.

You can compare suppliers fairly

Ask any supplier which of these stages they run and which they buy in. Our guide to verifying a China lab-grown diamond supplier lists the questions.

Visit Zhecheng

See It for Yourself

You are welcome to visit us in Zhecheng by appointment. If you can’t travel, we can show you the stones in your order by photo or video before anything ships.

  • Factory visits by appointment
  • Photos or video of your stones before shipping
  • Every report number checkable on the lab’s website
Questions

Factory Tour Questions

Do you grow your own diamonds?
Yes. We grow HPHT diamonds in Zhecheng, Henan. When an order calls for CVD material, we source it from qualified growers.
Can I visit or see my stones before shipping?
Yes. Ask us for photos or video of the stones in your order, and look up every report number on the lab’s website before anything ships. You are also welcome to visit us in Zhecheng by appointment.
Is the planning-screen image jewelry CAD?
No. It shows diamond planning software modelling a polished stone from rough. Jewelry CAD is a separate step used for custom and OEM designs.
Which stages apply to loose-stone orders?
Growth, cutting, grading, selection and matching, and final inspection. Jewelry production applies only to finished pieces.
Start a project

Ready to Spec Your Order?

Send shape, size, quality range and quantity, or a design. We reply within 1 business day.