Post-Growth Treatment in Lab-Grown Diamonds: What Buyers Should Understand About HPHT and CVD Processing

- Treated vs as-grown at a glance
- Treatment vs growth: why "HPHT" can mean two things
- Why CVD stones are often treated
- What treatment does and does not do
- Disclosure matters more than treatment itself
- How reports show treatment
- How to ask sellers about treatment
- Price, resale and choosing
- Common misconceptions
- Types of post-growth treatment
- Fancy colors and treatment
- What the rules say about treatment disclosure
- Treatment requirements in wholesale orders
- Treatment questions
- Order as-grown stones with proof
GIA looked at the CVD-grown diamonds sent to it since 2020 and found that about 80% had been treated after growth, almost always to take out a brown tint. Most of those stones were sold as near-colorless. Treatment is the normal route for CVD color, not an exception, which is why the report comment matters more than the grade.
Post-growth treatment is a process applied after a lab-grown diamond is grown, usually high heat and pressure (HPHT treatment) to improve or change color. It is common for CVD stones and less common for HPHT-grown stones. Treated lab-grown diamonds are still diamonds, and the common treatments are stable in normal wear. What counts is disclosure: a treated stone should be described as treated, and “as-grown” should mean no post-growth treatment of any kind.
Treated vs as-grown at a glance
Treatment vs growth: why “HPHT” can mean two things
HPHT is a growth method. HPHT is also a treatment process. A CVD-grown diamond can be HPHT-treated after growth to remove a brown tint. That stone is CVD-grown and HPHT-treated, not an HPHT diamond. Read report wording and supplier descriptions carefully. See HPHT vs CVD.
Why CVD stones are often treated
CVD growth can leave a brownish or grayish tint, which GIA traces to vacancy clusters and nitrogen-related defects. HPHT annealing after growth, at temperatures higher than those used for HPHT growth, can reduce it and raise the color grade. It adds no new diamond. Some producers have improved CVD growth enough to sell as-grown stones; others treat as a routine step. Treatment can also be used to create fancy colors.
What treatment does and does not do
It changes color. It does not change the diamond’s hardness or make it fake, and it is permanent in normal wear. It may change how a stone fluoresces or how it looks next to an as-grown stone of the same grade.
Disclosure matters more than treatment itself
A treated stone sold as treated, at a price that reflects it, is a fair sale. The problem is non-disclosure. Signs of weak disclosure:
- The listing shows grades but not the report comments.
- The seller says “natural color” or avoids the question.
- The invoice does not mention treatment when the report does.
How reports show treatment
Since January 2021, IGI reports have recorded treatment in the comments: “As Grown – No indication of post-growth treatment” when none is found, “Indications of post-growth treatment” when it is. Some CVD stones where the lab cannot decide still carry the older wording, “may include post-growth treatment”. Other laboratories and report types differ, and GIA’s announcement of its new lab-grown assessment does not describe treatment notes. The absence of a treatment comment is not proof that a stone is untreated. If you need as-grown stones, confirm that your report type states it, and get a written statement from the seller.
How to ask sellers about treatment
Price, resale and choosing
Treated stones often cost less than as-grown stones of the same grades. For many buyers that is a reasonable trade-off. If your brand promises “untreated,” “as-grown” or “no post-growth treatment,” make it a requirement on every order.
Common misconceptions
- “Treated means low quality.” Not necessarily; grades and cut decide quality.
- “Treated means it is no longer a diamond.” Treated lab-grown diamonds are still diamonds.
- “Only cheap stones are treated.” Treatment is used across many grades.
Types of post-growth treatment
Swipe the table to see more →
| Treatment | What it does | Typical use |
|---|---|---|
| HPHT annealing | High pressure and temperature reduce brown or gray tint | Most treated CVD stones |
| Low-pressure (LPHT) annealing | High temperature in a vacuum or inert gas, without high pressure | Some CVD stones |
| Irradiation | Can create a green tint, or reduce the phosphorescence of HPHT-grown stones | Some fancy colors and HPHT stones |
| Irradiation followed by heating | Produces pink and red | Most pink and red lab-grown stones |
Not every laboratory or report type lists each process. Ask what the report states and what the seller will confirm in writing.
Fancy colors and treatment
Some fancy colors in lab-grown diamonds come from growth conditions, for example yellow from nitrogen in HPHT growth or blue from boron added during HPHT growth. GIA notes that pink and red usually come from irradiation and heating after growth. Some silicon-bearing CVD stones look pinkish brown only for a while after exposure to light, a temporary effect rather than a treatment. Fancy colored stones should come with a clear statement of how the color was produced, as on our yellow, pink and blue lab-grown diamond pages. See fancy color lab-grown diamonds.
What the rules say about treatment disclosure
In the US, section 23.24 of the FTC Jewelry Guides says a gemstone treatment must be disclosed if it is not permanent, if it creates special care requirements, or if it has a significant effect on the stone’s value, and section 23.14 applies that rule to diamonds. For online sales, the disclosure belongs in the product description. Many sellers disclose all post-growth treatment so buyers can compare like with like. For brands, consistent wording on reports, invoices and listings avoids disputes.
Treatment requirements in wholesale orders
If your program requires as-grown stones, write it into the specification and the purchase order, ask for report types that state it where available, and request a supplier statement for unreported stones. For mixed parcels, ask for treated and as-grown stones to be separated and labelled.
Treatment questions
What is a post-growth treated lab-grown diamond?
A lab-grown diamond whose color was changed after growth, usually by HPHT treatment.
Are treated lab-grown diamonds bad?
No, if disclosed and priced correctly. They are still diamond and the result is stable.
How do I know if my lab-grown diamond is treated?
Check the report comments, and ask the seller to confirm in writing.
What does “as-grown” mean?
No post-growth treatment of any kind, whether the stone was grown by HPHT or CVD.
Order as-grown stones with proof
State in your inquiry whether you need as-grown stones only or accept treated stones, and which report you want. NUVU can arrange IGI, GIA or NGTC reports and can provide proof of no post-growth treatment on request. Send your requirements or WhatsApp / WeChat +86 191 1840 3930.
Sources

7+ years researching color tuning, inclusions and defect characterization of lab-grown diamonds.

About NUVU. NUVU is the international brand of New Perspective Superhard Materials Co., Ltd. in Zhecheng, Henan, China. We grow HPHT lab-grown diamonds in-house and cut, polish and match stones in our own workshop.
Related Guides
How Are Lab-Grown Diamonds Made? HPHT and CVD
How lab-grown diamonds are made: HPHT presses and CVD reactors, temperatures and growth times, treatment…
Read more →CertificationIGI Lab-Grown Diamond Report: How to Read It
How to read an IGI lab-grown diamond report: report number and LG inscription, measurements, 4Cs, cut…
Read more →NUVULab-Grown Diamond Certification Guide
IGI, GIA and NGTC lab-grown diamond reports explained: what each lab grades, GIA's 2025 Premium/Standard…
Read more →
Loose lab-grown diamonds10 shapes · IGI, GIA or NGTC reports