Lab-Grown Diamond Certificate Fields Explained: Color, Clarity, Cut, Polish, Symmetry, and Measurements

- Fields and how much they matter
- Measurements and carat weight
- Color
- Clarity
- Cut
- Polish and symmetry
- Fluorescence
- Comments
- Which fields to prioritize
- Proportion fields in detail
- Fields specific to lab-grown reports
- Reading a clarity plot
- Certificate field questions
- Shortlist stones by the fields that matter to you
The fields that most change how a lab-grown diamond looks are the cut grade (for rounds), the measurements and proportions, and where the inclusions sit. Color and clarity count too, but most lab-grown stones are sold in high grades, where one step up or down is hard to see. GIA said in 2025 that more than 95% of lab-grown diamonds entering the market fall into a very narrow range of color and clarity. So read each field together with the others: carat with measurements, clarity with the plot or video, cut with polish and symmetry.
Fields and how much they matter
Measurements and carat weight
Carat is weight, not size. A 1.00 carat round can measure from about 6.3 to 6.5 mm depending on depth. For fancy shapes, measurements also give the length-to-width ratio, which decides the outline: a 1.30 oval looks slimmer than a 1.45. Always read carat and measurements together.
Color
The color scale runs from D (colorless) downward. Because high grades are affordable in lab-grown stones, D to G is common. In a setting, especially yellow or rose gold, a G or H usually looks white. Larger stones and step cuts show color more readily than small brilliants. GIA’s lab-grown assessment uses Premium (D) and Standard (E to J) instead of letter grades, so a GIA document shows the band, not the letter.
Clarity
Clarity grades run from Flawless to Included. The grade says how visible inclusions are under 10x magnification, not where they are. A VS2 with an inclusion under a crown facet near the edge can look cleaner than a VS1 with one under the table. Use the plot, where the report has one, or video.
Cut
For round brilliants, cut grade is the strongest single indicator of brightness and sparkle. Fancy shapes usually have no cut grade (IGI has offered one for loose fancy shapes since 2022, and GIA plans one for ovals, pears and marquises in 2027), so use depth and table percentages, length-to-width ratio and video to judge them.
Polish and symmetry
Polish describes surface finish; symmetry describes how precisely facets align. Excellent or Very Good in both is normal for good lab-grown stones. Lower grades can reduce crispness slightly.
Fluorescence
The report lists None, Faint, Medium, Strong or Very Strong. It rarely changes appearance; if the report says Strong or Very Strong, check the stone in daylight for haze. Under a UV lamp, many colorless HPHT stones glow blue-green and keep glowing briefly after the lamp is off, one of the signs laboratories use to identify them.
Comments
Comments may state the growth method, the treatment finding and other notes. On IGI reports the treatment line reads either “As Grown – No indication of post-growth treatment” or “Indications of post-growth treatment” (older reports: “may include post-growth treatment”). Not every report type includes this line. See how to read a report.
Which fields to prioritize
- Cut (rounds) or proportions (fancy shapes).
- Measurements for face-up size.
- Clarity location rather than clarity grade.
- Color within a range that looks right in your metal.
- Polish, symmetry and fluorescence as checks.
Proportion fields in detail
Swipe the table to see more →
| Field | What it is | Common range for well-cut rounds |
|---|---|---|
| Table % | Width of the top facet vs diameter | About 54–58% |
| Total depth % | Height vs diameter | About 59–62.5% |
| Crown angle | Slope of the upper section | About 34–35° |
| Pavilion angle | Slope of the lower section | About 40.6–41° |
| Crown height % | Height of the crown vs diameter | About 14–16% |
| Pavilion depth % | Depth of the pavilion vs diameter | About 42.5–43.5% |
| Girdle | Thickness of the edge | Thin to slightly thick |
| Culet | Bottom point | None or pointed |
Fancy shapes have their own typical ranges and often no overall cut grade (IGI can grade loose fancy shapes; GIA plans to from 2027). As a worked example, an IGI report for a 2.02 ct round graded Ideal lists table 58%, depth 61.3%, crown 35° and 14.5%, pavilion 40.8° and 43%, and a medium faceted girdle: every figure inside the ranges above.
Fields specific to lab-grown reports
- Description: states laboratory-grown origin.
- Growth method: CVD or HPHT, where stated.
- Treatment: as-grown or post-growth treated, where stated.
- Diamond type: some reports list it. Type IIa means almost no nitrogen; Type IIb means a trace of boron, which GIA finds in most colorless HPHT stones and which can add a faint blue-gray.
- Inscription: usually the report number; GIA inscribes “Laboratory-Grown” and the assessment number.
Reading a clarity plot
Some reports include a diagram showing where inclusions sit, with symbols for types such as crystals, feathers and clouds. Use it to see whether inclusions are under the table (more visible) or near the edge (often hidden by prongs). Not every report includes a plot.
Certificate field questions
Which certificate field matters most?
Cut for round brilliants; proportions and outline for fancy shapes.
What does VS2 mean on a lab-grown diamond?
Minor inclusions visible under 10x magnification. Many VS2 stones are eye-clean, but check location.
Do all reports include a clarity plot?
No. It depends on the laboratory and report type.
Shortlist stones by the fields that matter to you
Tell NUVU which fields matter most for your product, for example a depth limit or as-grown only, and we will shortlist stones to match, with their reports. Send your requirements or message us on WhatsApp / WeChat at +86 19118403930.
Sources
- GIA: Diamond quality factors
- GIA: New descriptive terminology (June 2025)
- GIA Gems & Gemology: Laboratory-grown diamonds, an update on identification (2024)
- GIT: IGI lab-grown reports to indicate treatments (Jan 2021)
- IGI: Cut grading for fancy-shaped diamonds (Sep 2022)
- Rapaport: GIA to launch cut grade for select fancy shapes in 2027 (Jun 2026)

12+ years in lab-grown diamond grading, identification and quality assurance for both HPHT and CVD stones.

About NUVU. NUVU is the international brand of New Perspective Superhard Materials Co., Ltd. in Zhecheng, Henan, China. We grow HPHT lab-grown diamonds in-house and cut, polish and match stones in our own workshop.
Related Guides
4Cs guide
The 4Cs for lab-grown diamonds in one page: which cut, color, clarity and carat to choose for your shape and metal…
Read more →Certificates & gradingIGI report guide
How to read an IGI lab-grown diamond report: report number and LG inscription, measurements, 4Cs, cut grade…
Read more →Certificates & gradingCertificate vs appearance
Why two lab-grown diamonds with the same report can look different: proportions, inclusion location, bow-tie…
Read more →
Loose lab-grown diamonds10 shapes · IGI, GIA or NGTC reports